Tous les prix sont en Euro (EUR) (EUR)et incluent la TVA à 20% le cas écheant.La TVA sera déduite au moment du paiement pour tous produits fournis hors de l'Union Européenne

Liquide Kreem - incluent Doublure de Réservoir de Carburant et Préparation de Réservoir - Paquet de 3 Bouteilles
€ 58.33 Information Information sur la Pièce

3 piece Combi Pack - contains:
Wash/Cleaner, Final Prep, and Fuel Tank Liner.
KREEM FUEL TANK LINER is designed for use as a preventive maintenance product
in metal tanks new and old. It contains gasoline, gasohol, or diesel.
KREEM TANK LINER has a unique formulation with extremely rapid set-up that prevents
leakage from hairline cracks and seam pinholes
by coating the tank’s inner surface with a fuel resistant elastomer.
Not for plastic tanks.
KREEM is NOT compatible with all fibreglass tanks.
You must spot test before use.
Description Complète
TANK CURE - Enleveur d'époxy - 500ml
€ 31.22 Information Information sur la Pièce

TANK CURE Epoxy Remover
This product will remove all old layers of paint and/or sealants.
Only use this product if you would like to apply new sealant or if you plan to weld on your tank.
You only need this product if you want to remove old layers of sealant or paint, or if welding is needed on a tank that has sealant inside.
For a motorcycle tank you will need 1/2 a litre of Tank Cleaner and 1/2 a litre of Rust Remover.


Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
TANK CURE - Mastic époxy - 450gms
€ 38.17 Information Information sur la Pièce

TANK CURE tank sealant is based on a 2 component epoxy resin.
After adding the two components together, stir them thoroughly for a couple of minutes,
empty the can in your petrol tank and seal the filler opening properly.
Now slowly turn the tank in all directions.
Keep turning for about 15 to 20 minutes.
The sealant should touch all surfaces several times to form a good layer.
Now open the filler cap and put the tank upside down to drain as much sealant as possible.
Tank up to 20 litres (up to 4.5 gallons): 450 grams
Tank up to 50 / 60 litres (up to 10 / 12 gallons) 600 gram


Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
TANK CURE - Mastic époxy - 600gms
€ 49.86 Information Information sur la Pièce

TANK CURE tank sealant is based on a 2 component epoxy resin.
After adding the two components together stir them thoroughly for a couple of minutes,
empty the can in your petrol tank and seal the filler opening properly.
Now slowly turn the tank in all directions.
Keep turning for about 15 to 20 minutes.
The sealant should touch all surfaces several times to form a good layer.
Now open the filler cap and put the tank upside down to drain as much sealant as possible.
Tank up to 20 litres (up to 4.5 gallons): 450 grams
Tank up to 50 / 60 litres (up to 10 / 12 gallons) 600 gram


Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
TANK CURE - Dérouillant - 500ml
€ 16.60 Information Information sur la Pièce

TANK CURE Rust Remover
Tanks with a rusted interior can be treated very successfully with this product.
We advise to use the Rust Remover if the inside of your tank is severely rusted.


Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
TANK CURE - Nettoyant de Réservoir d'Essence - 500ml
€ 16.60 Information Information sur la Pièce

TANK CURE Tank Cleaner
This is a strong cleaning fluid to degrease your tank.
We recommend you always use this product because it will guarantee good adhesion of the sealant to the surface of the petrol tank.
If you use the sealant in a tank for a two stroke engine it is necessary to use the tank cleaner first.


Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
Joint de Réservoir de Carburant - Enduit Interne Résistant d'Essence pour Réservoir de Carburant Rouillés ou Piqués 250ml
€ 37.30 Information Information sur la Pièce
Tapox is a two part epoxy that gives outstanding protection in the harshest conditions. A primary objective in its design was to provide a fuel proof coating that could be used to coat the inside of petrol and diesel tanks. Both old and new tanks benefit from a Tapox coating. As lead is no longer added to petrol all metal tanks are subject to attack. In a vehicle renovation situation then the best approach is: Degrease tank Lead fill any significant holes Degrease inside of tank again Treat with Fertan rust converter to convert any rust and put an inert rust free coating on the inside of the tank. Treat with Tapox. Tapox is fully compatible with today's High-Ethanol based fuels. Full instructions supplied.
Cet Elément n'est pas Stocké. Commandé sur Demande Seulement.
Description Complète
 

<< Retourner a la page d'acceuil

VISIONNEZ LA COMMANDE >>